How To Make Feminized Cannabis Seeds Like The Pros
Growing from feminized cannabis seeds is a space and resource-efficient way of getting all girls, all the time. Find out how to create your own feminized cannabis with Royal Queen Seeds.
MAKING FEMINIZED SEEDS
Growing cannabis is all about resinous flowers, trichomes, and rich cannabinoid profiles. These splendid characteristics can only be found on the female flowers. Having gardens full of robust, un-pollinated sinsemilla females means jars full of mind and body-friendly, crusty nuggets.
The only bummer, unless you grow from clones, is that cannabis is wired to produce about 50% male seeds and 50% females. It is just the nature of the beast.
Wouldn’t it be sweet if it was possible to grow all females from seed, every plant, every time?
Well, that is where the feminizing technique comes into play: two methods of manipulating the cannabis plant to produce only females from seed, every-time. To be truthful, it isn’t every single time. But 99% of the time is a pretty good number, and could be considered entirely male risk-free.
The general practice behind feminization is that female plants are forced to produce pollen, which is in turn used to pollinate other female plants. The outcome? Resulting seeds will be feminized, with no risk of further pollination.
Feminized seeds are super efficient for indoor and outdoor gardeners. Area, time, and resources aren’t being given to plants that will be thrown away two weeks after the 12-12 flip. Similarly, outdoors where a large plant can consume a lot of time and resources in upkeep prior to the autumn show of flowers, feminized plants are also a good way to reduce guerrilla crop pollinating. There’s nothing worse than bush-bashing out to a well-hidden crop only to find a rogue male or two have impregnated every female plant.
INHIBIT THAT ETHYLENE
“Applications that reduce the ethylene level in tissues or antagonise the action of ethylene causes the formation of male flowers instead of female ones” — Paraphrase, Byers et al., 1972.
There are a number of solutions that can be sprayed on female plants to create male pollen sacs: benzothiadiazole, gibberellic acid, silver thiosulphate, silver nitrate, and colloidal silver.
Colloidal silver is by far the easiest to source or make. It is non-toxic, non-caustic, and can be bought from a pharmacy or easily online. The other solutions can be dangerous, difficult to get a hold of, and expensive—except gibberellic acid, which can be found in nurseries, but is not as effective as colloidal silver. But if you want to watch some freaky plant growth just for the fun of it, give gibberellic acid a try. It is a growth stimulant and makes plants stretch and stretch.
TECHNIQUE 1: COLLOIDAL SILVER
Colloidal silver is a distilled water-based solution in which microscopic particles of silver are suspended. The nature of colloids means the particles will never settle out and can’t be removed by normal filtering. Colloidal silver is available commercially, or you can make your own if you want to totally geek out (see how-to section at the end). It has numerous uses as an alternative medicine. For example, it is used to soothe burns, as an antiseptic and digestion stimulant in people, and as a fungal control in horticulture.
Be sure the strength is at least 15ppm, preferably 30ppm. Less than 15ppm produces male sacs with little viable pollen.
To begin with, select a plant that has the characteristics you want to preserved. Feminizing clones is the usual practice as the growth, flowering, and resin characteristics from the mother are already known. There is no need for any vegetation time once a clone is well-rooted. Simply pot the clone into a small pot, give it a day or two to recover, and begin a 12-12 light cycle right away. A pollen-producing plant only needs to be small as cannabis produces copious amounts of pollen.
Hint: Make two clones once a plant has been selected, one to be feminized and one to be left for pollination. This way, a separate breeding space is created and accidental seeding of other plants, or an accidental sneeze pollinating a whole grow cupboard, is avoided.
Plants can be induced to grow male sex organs as late as four weeks into flowering. Though spraying one week prior to the light changeover is recommended for clones. If a plant grown from seed is being used, wait until the plant has sexed before spraying so you can be sure it is female.
Spray the plants to be feminized with colloidal silver every day, and three times a day if you can manage. Soak them well. Do this for two weeks, then leave the plants to grow as normal. Some growers report getting results after spraying for only 5–10 days.
When sexing begins, male pollen sacs will develop instead of female calyxes and pistils. Male plants mature much faster than females, and viable pollen can be expected within 3–4 weeks once the plant has been sexed. Some growers will spray until the plant shows sexual growth, just to be sure the method has worked. Make sure these plants are well-isolated from any flowering females. A burst pod can release millions of pollen spores, and it only takes one spore per hair to create a seed.
DON’T SMOKE IT
Once the plants have been sprayed with colloidal silver and the pollen is collected, they are write-offs—86 them and don’t smoke them. Giving them a thorough rinse will not work. The colloidal silver is a systemic treatment absorbed into the plant through the foliage and not a topical application. Be safe and bin them.
TECHNIQUE 2: RODELIZATION
Sinsemilla is an unnatural state for cannabis. Without human intervention, it would be rare to find an unpollinated female in the wild—unless it was sterile. When sinsemilla plants are left to go beyond their desirable maturation stage by a number of weeks, the plant, through whatever amazing processes evolution has bestowed, knows it has not been pollinated. As a last ditch effort at propagation, it will produce male pollen sacs in an effort to self-pollinate.
This is not the result of genetic or stress-induced hermaphroditism. They are genuine XX chromosome male bananas. With all the genetic information from the female and no Y chromosome, using rodelized pollen creates female-only seeds, although as with colloidal silver, an occasional male may appear.
HARVESTING POLLEN AND POLLINATION
There are a number of harvesting methods employed to catch pollen.
- Cover the top of the pot with plastic or card to catch pollen as it falls, or modify a plastic drink cup to shroud the plant and catch falling pollen.
- Fix a clear plastic bag, perforated at the top for air exchange, around the whole plant.
- An experienced eye will remove each flower pod prior to it bursting completely open to be sure of catching every spore.
- Pollinating a female is the easy bit. Depending on how many seeds you want to make, there are a couple of methods that can be used.
- Using a watercolour or other fine, soft brush or even a cotton bud, dip into your pollen collection and gently apply to the chosen flower. Although thousands of viable spores will be on the end of the brush, enough to pollinate a whole plant, the trichomes on the surface of the pistils will greedily glue everything you offer them. So dip into your pollen stash a few times as you dust.
- For lots of seeds, put pollen in a bag and put over a whole branch or a whole plant, shake well, and leave for twenty four hours.
- It is possible to pollinate different branches with different pollens and have a breeder plant that has 1, 2, or 15 different crosses on it.
- It is also possible to self-pollinate the plant from which the male parts were created. This won’t produce as many seeds as pollinating a separate plant because less female flowers are produced and many are nonviable because of the feminization process.
GROWING FEMINIZED PLANTS
Treat feminized seeds as you would any other seed from germination to veg, and veg through flower. Observation is where it’s at now, you want the best plants for your garden. Ideally, setting up a separate vegetation/flower space where a number of plants can be grown lets your standard grow space continue with uninterrupted production.
Plants bred using feminization are homozygous. This can have two effects that can’t be assessed until the seeds are grown. Homozygosity will increase the dominant or recessive traits of the parent in the progeny, so features you don’t want and do want can be amplified. Genetics is a weird, weird thing.
Just as with standard male to female crossings (which is a heterozygous process), a number of plants will need to be grown and the best selected for mother plants and future breeding. With enough room, hundreds if not thousands of new plants can be grown in order to select the best of the best phenotypes.
With a bit of aforethought, it is possible to set up an efficient feminization breeding programme—and have female seeds from your favourite phenos on hand all the time. You never know, you might discover the next big thing!
MAKING YOUR OWN COLLOIDAL SILVER
The easiest and relatively inexpensive way—considering how much money is potentially saved by not growing resource and time-consuming males—is to buy a colloidal silver generator, which is the no-fuss plug and play option. Or, make your own, which is quite straightforward and doesn’t require any special skill.
Colloidal silver is formed by passing a current from a pure silver electrode through distilled water. This simple electrolysis is all there is to it. Although distilled water does not conduct electricity very well due to its lack of mineral content, enough is passed through to create micro silver particles and silver ionisation. Sounds technical, but it really isn’t.
Feminized cannabis seeds only produce female plants, which has a number of advantages. Find out how to do it with Royal Queen Seeds.
How to Make Feminized Seeds at Home
by Nebula Haze (originally inspired in part by this thread from PhenoMenal)
Table of Contents
5 Steps to Feminized Seeds – Learn how to force female plants to make pollen and create feminized seeds
Introduction to Feminizing Your Own Cannabis Seeds
First of all, what are “feminized” marijuana seeds? Feminized seeds are seeds which have been created by breeding two female plants together. Because there are no male parents, all the resulting seeds end up being bud-bearing female plants. With feminized seeds, you know you can always count on every plant to produce buds, and don’t have to worry about removing male plants (which cause lower yields and seedy buds if they’re left among your female plants). Learn more about male vs female cannabis plants.
Feminized seeds come from two female plants being bred together, causing all offspring to be female
Feminized seeds are commonly available from seed banks for nearly every popular or famous strain. Breeders understand that a lot of people just want to grow plants for buds, and don’t care about making a robust breeding program (which is one of the main reasons growers want male plants).
So how do seed banks feminize their seeds? How can you breed two female plants together?
The main idea is to force a female plant to produce pollen sacs like a male plant. These male flowers (growing on a female plant) create pollen, which can be harvested and used to pollinate another female cannabis plant. The resulting seeds will all end up being female. Can feminizing seeds cause hermaphrodite plants?
Growers can force a female plant to make pollen sacs, and the “feminized” pollen produced can be used to fertilize another female plant
How do you force a female plant to make pollen?
There are two main ways to make feminized pollen:
- Induce feminized pollen chemically (Recommended) – This is the “professional way” to feminize seeds, and is how most reputable seed banks and breeders create feminized seeds to sell to the public. Substances such as colloidal silver and gibberellic acid are used because they cause a female plant to produce male pollen sacs if bud sites are drenched daily for the first 3-4 weeks after the switch to 12/12. This article will give you step-by-step instructions on how to feminize cannabis seeds using this method.
- Rhodelization (Not Recommended!) – In the wild, some female cannabis plants will naturally start making male pollen sacs or “bananas” which can self-pollinate the plant. This happens if the plant is stressed, or if the plant is not harvested in time and buds start to die of old age. The plant is basically doing everything it can to save the next generation. This method is “natural” and these seeds will all end up being mostly female, but the problem is you’re selecting for plants that naturally hermie (grow both male and female sex organs) without any chemical induction. This means the resulting seeds are much more likely to turn hermie in natural conditions too. That’s a problem if you don’t want seedy buds every time you harvest. For that reason, it’s highly recommended you don’t feminize seeds this way, and it’s a good idea to toss any and all seeds that are the result of natural herming.
Read this article for more in-depth discussion about the pros and cons of each method, and how to avoid hermaphrodite plants when producing your own feminized seeds.
Overview: How to Make Feminized Seeds
1.) Buy or Make Colloidal Silver – The article below will teach you how to make colloidal silver at home, as well as show you where to buy it if you don’t want to make it (it’s actually pretty cheap!). It’s basically a solution of silver suspended in water and is available online and in health stores as a dietary supplement.
What about gibberellic acid? I’ve seen with my own eyes that the colloidal silver method works for making feminized seeds, but I don’t personally know anyone who has tried making feminized seeds with gibberellic acid. From what I understand it can be used exactly the same way as colloidal silver to induce female plants to produce pollen, but I’m not sure exactly how to prepare a gibberellic acid solution that works consistently.
2.) Spray the bud sites of your known female plant daily during first 3-4 weeks of the flowering stage (until pollen sacs form and start splitting open) – After switching to a 12/12 light schedule, choose bud sites on your known female plant, and spray/drench them daily with colloidal silver (or gibberellic acid). As the treated flowers develop, they will form into male pollen sacs. Untreated bud sites on the plant will form into female buds as usual; however, these buds are unsafe to smoke unless you’ve been very careful to make sure they didn’t come into contact with colloidal silver or gibberellic acid during the feminization process.
3.) Harvest “Feminized” Pollen – When pollen sacs are ready to be harvested they swell like a balloon and start to open up. Make sure not to harvest early and also make sure to keep spraying the bud sites daily until this point or you might end up with empty pollen sacs! When the pollen sacs are ready, the leaf section protecting the pollen will start to crack. At this point, it’s time to collect the feminized pollen. One of the easiest ways to do this is to collect the pollen sacs directly and let them dry for a week. At that point, they can be placed in a bag and shaken to easily collect all the pollen.
4.) Pollinate Another Female Plant – At this point, take the feminized pollen you’ve collected and use it to pollinate a female plant that has been flowering for about 2-3 weeks (full detailed instructions with a video on how to do this below). Although it’s possible to pollinate the same plant as the original, it’s not recommended in part because the timing doesn’t match up (attempting to pollinate buds too late in the flowering stage leads to reduced seed production). It’s best to pollinate a different female plant that you started budding a few weeks after the original. This increases the number of seeds produced as well as gives the new female plant enough time to develop them to maturity. It also increases genetic diversity compared to self-pollination.
6 Weeks to Harvest Seeds – After about 6 weeks from pollination, the calyxes on the buds of your female plant will be swollen and fat. You know it’s time to harvest your seeds when they start bursting out. At this point, it’s time to congratulate yourself because you’ve got feminized seeds!
Now that you’ve gotten the overview, here’s the feminization process with detailed step-by-step instructions…
Step-By-Step Instructions (with pics!)
1.) Buy or Make Colloidal Silver (or Gibberellic Acid)
Where to get Colloidal Silver (your options):
Note: You can purchase gibberellic acid online (a gibberellic acid solution can be used the same way as colloidal silver for feminizing seeds). However, I do not have experience with the gibberellic acid method and don’t know the best way to prepare the solution.
2.) Spray the bud sites of your known female plant daily during first 3-4 weeks of the flowering stage (until pollen sacs form and start splitting open)
When you’re ready, change to a 12/12 light schedule in order to initiate flower formation. For photoperiod plants, wait until your plant is 5-6 weeks old before initiating the flowering stage. Some young plants seem to have trouble (and take much longer) to go through the feminization process, and their pollen may not be as fertile, so start with a more mature plant.
As soon as you change the light schedule (and maybe even a day or two before) start spraying your plants thoroughly with colloidal silver at every bud site you want to form into pollen sacs.
Spray bud sites thoroughly, drenching them with colloidal silver every single day
The above pic shows you where pollen sacs form on the plant (same places female buds form)
Important! Keep spraying daily until pollen sacs open up. Don’t stop spraying early, even if pollen sacs appear to be already formed, otherwise they may not produce much pollen!
A one-hand pressure sprayer / mister is really helpful for spraying bud sites evenly and thoroughly
You can choose to treat a single bud site or all the bud sites on the plant. Any untreated bud sites will develop into female buds as usual. If you want to smoke these buds, it’s incredibly important to avoid letting them come into contact with colloidal silver as that’s not safe to smoke. (Don’t worry, feminized seeds don’t contain any silver). I highly recommend letting the whole plant be your test subject so you don’t have to worry about that ?
Note: If you’re feminizing an auto-flowering plant, start spraying daily when the plant is about 20 days old from seed. This is when most auto-flowering cannabis strains start making flowers.
3.) Harvest Your Feminized Pollen
When pollen sacs are starting to crack and look like they’re about to open up (or if you can see one has already opened) then your pollen is ready for harvest!
When pollen sacs are cracking and opening up, you’re ready to harvest your pollen!
Pollen spilling onto a nearby leaf
One way to harvest your pollen is to gently and carefully remove all the pollen sacs. Let them dry for a week, and then put them in a resealable bag. If you shake the bag the pollen should easily spill out. You may need to cut a few open yourself.
How to Store Feminized Pollen: Moisture is your main enemy when storing pollen. It can help to double the mass of the pollen collected by adding regular cooking flour. This absorbs moisture during storage and as an added bonus, it will make application easier when you get to pollinating. If you triple-bag the pollen-flour mixture and stick it in the freezer (with a good nametag so you know where the pollen came from), your pollen can be stored for a year or longer.
4.) Pollinate Another Female Plant
When your chosen mother is 2-3 weeks into the flowering stage, take a paintbrush and ‘paint’ your feminized pollen on the developing bud sites you want to pollinate. Bud sites (for both male and female plants) are located wherever you can see leaves meet a stem.
Only the buds that come in contact with pollen will grow seeds. You can choose to pollinate all of your buds or just a few on the plant.
Make sure that you’re touching all the female pistils/hairs with your pollen. Here’s a little video showing you exactly what this looks like!
6 Weeks to Harvest Seeds
It usually takes about 6 weeks for your feminized seeds to fully develop. Some plants are literally dying right as the seeds become ready, so to get the most viable seeds, you need to try to keep it alive until the seeds actually start dropping. The seeds can be used right away, or stored in a cool, dry place for a few years. Don’t forget to label them with the date!
This seed is about to burst out of its calyx!
This is what it looks like when the seed is exposed
Picture Journal of Making Feminized Pollen with Colloidal Silver
This grower initiated the feminization process on a seedling that was only a few weeks old. As a result, the plant wasn’t able to get big enough to produce many pollen sacs. You will get even better results if you start with a plant that is at least 5 weeks old ?
October 18 – Plant right before the switch to 12/12
October 27 – After being drenched with colloidal silver daily for a little over a week
October 30 – Pollen sacs are forming
November 15 – Pollen sacs appear to be almost fully formed and are swelling in size, but haven’t opened up yet. Don’t stop spraying colloidal silver or you may end up with empty sacs!
November 27 – Pollen sacs are opening up! Collect the pollen before they’re all open!
FAQs – Frequently Asked Questions
How can I identify plant gender before the plant actually starts flowering? (Besides using feminized seeds)
There are a few ways to identify plant gender before the plant actually starts flowering, and each is helpful in different situations.
- Start with a clone – A clone is an exact copy of another plant. If the “mother” of the clone is a female plant, it means the clone is also female
- Look at preflowers (identify plants when they’re 3-6 weeks from seed) – If you know where to look, cannabis plants will actually reveal their gender in the vegetative stage when they’re just 3-6 weeks from seeds. Male plants usually show their gender by 3-4 weeks and female plants usually show their gender around week 4-6 from seed. Learn how to determine the gender in the veg stage by looking at preflowers.
- Test the leaves of your seedling – It’s possible to send in a leaf from a young cannabis plant to a specialized testing company, and they will be able to determine the gender as soon as 3 weeks from seed! Although I haven’t used any of these companies and can’t recommend any in particular, here’s a link to one example just so you can see what I’m talking about. From talking to other growers who use this method, it appears to be very accurate.
- Take a clone and force it to start flowering – if you take a clone from a vegetative plant, you can force that clone to start flowering and reveal its gender. You’ll know the gender of the “parent” plant by the gender expressed by the clone. In my opinion it’s better just to look at the pre-flowers since they’ll usually tell you sooner than if you use this method (in this case you have to wait for the seedling to get old enough to clone, then wait for the clone to make roots, then wait for the clone to start flowering – which usually takes weeks longer than the much easier pre-flower method).
- Look at the seed itself – Some growers swear by this method (if someone knows the author of this popular but anonymous picture that has been circulated on the internet since at least 2008, please let us know!). The idea is to look at the seed’s characteristics because to some extent, some seeds look “more female” than others. According to people who use this method, it’s better than random guessing but unfortunately in the best-case scenario, even the growers I’ve talked to who have experience using this method say it only has up to 70% accuracy. That means about 1/3 of “female” seeds end up being male. It also creates false negatives, which means that about 1/3 of the “male” seeds you’re throwing away are actually female. It’s better than 50/50 but when using this method; it’s not a way to ensure that all plants are going to be female. Personally, I do not recommend using this method as a way to identify gender. I believe all the other methods are much more accurate and depend less on needing experience!
Can I Make a Breeding Program Using Just Female Plants and Feminized Seeds?
Yes, it’s possible to use just female plants and feminized seeds for further breeding, with one major caveat.
Without careful and thorough testing, it may be possible to accidentally select for cannabis plants that tend to herm (make male flowers or pollen) and cause seedy buds when you don’t want them to.
For each possible “mother,” clones should be grown in several different environments and tested thoroughly to make sure that the mother plant does not have any tendency to make pollen naturally in normal or stressful conditions. It’s okay if plants grow pollen sacs if induced chemically since that is very unlikely to happen in someone’s garden on accident, but you don’t want plants that will start growing male parts on their own without chemical induction. Thorough testing of plant hardiness is always important when breeding, but it may be especially important when breeding feminized seeds together.
Are there other reasons I should avoid breeding seeds without males?
The most common reason growers say you shouldn’t do this is because it’s “unnatural” or doesn’t “seem right.” Some growers say you need male plants for genetic diversity. I’ve also heard growers say that the resulting plants will be weaker, sterile, less potent and once someone even told me that resulting plants “will be worse in every way.”
As of yet I haven’t seen any of these claims backed by actual personal experience, or any real-life examples showing why using feminized seeds is not a viable way to breed new strains.
To those who say this type of reproduction just doesn’t seem right, the evolutionary strategy of plants using only female and hermaphrodite plants to breed is actually pretty common and is known as gynodioecy. One example of a plant that only reproduces this way is a flower found in Canada and the US called Lobelia siphilitica, also known as the Great Lobelia. Obviously this reproduction method isn’t exactly the same as artificial feminization since the pollen production is caused naturally instead of induced chemically, but examples of gynodioecy show that a female flower-based breeding population can exist in the wild even when no plants are purely male.
The Great Lobelia naturally reproduces using only female and hermaphrodite plants. This is similar to the cannabis feminization process because it results in a population of plants that all primarily grow female flowers, with no pure male plants
When it comes to genetic diversity, the ability to cross out to thousands of different cannabis strains allows you to dramatically increase the gene pool without using male plants.
So those are my answers to the common objections of a feminized seed-based breeding program, however I am just a theory-crafter when it comes to this topic.
It certainly seems possible that a feminized-only breeding program could run into unforeseen problems down the road, but as far as I know there isn’t any evidence of that so far.
Although I have a few anecdotes from growers who have used only feminized seeds for a few generations, it would be much better to share information from someone who has conducted plenty of testing over several generations. We’d love to hear from you if you have bred more than a few generations using only feminized seeds and want to share your experience!
What are positive aspects of breeding two feminized seeds together?
Besides not having to worry about male plants in the next generation, the main advantage of doing this is you have a much better idea what you’re working with when it comes to producing the type of buds you’re looking for. When you’re growing a male plant, it has several genes it will pass to its offspring that has to do with how buds develop, but since it’s a male plant those genes aren’t expressed and it’s hard to figure out what they are.
Historically, the way to learn more about the “hidden genes” contained in a male plant is to breed it to several well-known female plants, and see how the offspring compare to each other. The genes that don’t come from the known mother plant are assumed to come from the male. Another way of going about this is to take several clones of the same well-known female plant, and breed them with many different male plants to see which ones produce the best offspring.
After testing with several pairings, you start to get an idea of the hidden genes a male plant has to offer to its female offspring. This time-consuming process of documenting and identifying good male plants is why proven stud male plants are one of the most valuable and closely guarded types of clones available today.
But the process of finding the right “father” is a little different when you start with two female plants. In this case you already know quite a bit about the genes of both parents because you can just look at and test the buds of both plants directly. This allows you to pinpoint desirable genes with less guessing and much less time spent growing out and cataloging plants!
Why even have male plants then?
In nature, male plants are very effective at increasing genetic diversity by ensuring cross pollination. With only purely male and purely female plants, every resulting seed will have two different parents.
Another big advantage in the wild of having separate female and male plants is sexual specialization. In other words, plants are able to evolve male and female traits separately, so each type of flower can become more specialized at its unique “job.”
However, this isn’t the only successful breeding strategy for plants. In fact, only 6-7% of plants have completely separate male and female plants like cannabis plants do (known as dioecious plants). Most plants grow some mix of male and female flowers on each plant, with different combinations offering different evolutionary benefits.
You might enjoy this scientific article if you want to learn more about the evolution of sex determination in plants and animals: Sex Determination: Why So Many Ways of Doing It?
And although most cannabis strains (at least the good ones) display either purely male or purely female flowers, there are some wild populations (and some strains of hemp) that regularly produce plants with male and female parts on the same plant.
When it comes to artificial selection for breeding new strains, the grower is in charge of cross pollination, so there’s no need for the plant to specialize in male parts. Pretty much the only thing most growers care about is how female flowers develop. So (unlike in nature) growers have the freedom to choose plants that improve female buds without even having to consider how it might affect male plants.
Can feminizing seeds result in hermaphrodite plants?
The answer is yes. If you do it the wrong way then feminization can lead to plants with an increased chance of herming. However, with a well-tested and well-bred feminization program, one of the main goals is to breed out any plants with hermaphroditic tendencies that show up under normal conditions. When you buy feminized seeds from trustworthy breeders, you can count on the fact that every plant will end up growing only female flowers and that’s it.
This is a relatively big topic with a lot of controversy so I wrote a whole article about it if you want to check it out!
Can I pollinate the same plant I collected the pollen from?
Yes, it’s possible. However, it’s not really recommended because for one, the timing doesn’t match up. By the time your pollen is ready to use, your original plant will already be several weeks past the optimum pollination point. It’s best to pollinate a female plant that has only been flowering about 2-3 weeks. It’s also possible to run into unwanted side effects from self-pollination/inbreeding.
One thing to keep in mind is even if you pollinate a plant to itself, the resulting seeds are likely not going to be exact copies of the original (unless the original plant is extremely inbred). The resulting seeds will be a mix of both the mother’s expressed genes and her hidden ones.
Ever wondered how those marijuana seed banks make feminized seeds? Learn how to create your own feminized seeds at home using two female plants!