We create all of our scientifically-formulated Pure + Potent products with a commitment to quality and purity in mind. Call us today to learn more. Extract the full spectrum of CBD When prioritising the best CBD products, it’s important that each step of the process is carried out with care and precision. You can grow high-quality hemp, with a large percentage of cannabidiol (CBD), but all of that goes to waste without the proper extraction techniques. So, that ra Numerous studies have shown that CBD has therapeutic properties that are effective for the treatment of certain diseases. Cannabis olive oil can be a good alternative …
What Are the Most Popular CBD Extraction Methods?
CBD has exploded in popularity over the last couple of years and, while most people are familiar with the term and may have even sampled a few CBD-containing products, it’s rare that the average consumer knows the intricate details of the process used to create them. At Pharmstrong™, the entire process from seed to final product fascinates us – especially the extraction methods, as the various techniques used greatly affect the quality, taste, and potency of the final product. We believe it’s worth sharing tidbits about the most popular extraction methods on the market today because knowing this information is not only interesting, but helps the consumer make an educated decision when it comes to selecting the right CBD provider for their needs. Therefore, let’s take a closer look at some of the most popular extraction methods and a few advantages and disadvantages of each.
Quick Review of the Basics
Before diving into the specific extraction methods, it’s helpful to review a few simple, yet important, frequently asked questions about CBD in general:
What is it and where does it come from?
CBD is a cannabinoid, a chemical compound extracted from hemp plants.
Is it legal?
Yes! However it must be hemp-derived and contain .3% or less THC to be legal according to the 2018 Farm Bill. If you purchase a hemp-derived CBD product from a reputable company, who is transparent about the source of their products and provides lab results verifying the levels (or in many cases, the complete absence) of THC, you have nothing to worry about.
What are some common uses of CBD?
This unique and powerful compound is very versatile, making it the perfect addition to many products. CBD is commonly added to carrier oils – such as organic olive oil or MCT oil – to create fast-acting oral drops (which go under the tongue), mixed with beeswax and essential oils for soothing topical balms, or broken down into tiny nanoparticles for incorporation into easy-to-swallow, highly bioavailable softgel capsules. CBD is also commonly used in vaping products and added to gummy candies and energy drink mixes.
Popular CBD Extraction Methods
In order to make beneficial and highly-effective products, the CBD must first be carefully extracted and preserved from the hemp plant. Maintaining the quality and purity of the main ingredient is essential to creating a premium CBD product.
There are several methods for extracting CBD from the hemp plant, and even a few DIY versions (which we don’t recommend). But let’s take a look at several of the most common extraction methods:
Extraction by Solvent:
With this method, a solvent – commonly food grade ethanol, or a hydrocarbon like butane or propane – is soaked or washed over plant trimmings, drawing out the desirable compounds. In the case of hydrocarbon extraction, the resulting mixture, which now contains the cannabinoids and other useful compounds such as terpenes, is then further refined (the refinement method depends on the desired end product) and the majority of the solvent is removed. From there, a final purging of any remaining solvent is done, leaving a concentrated CBD oil. With ethanol extraction, the resulting liquid is then distilled to separate the hemp oil from the food grade ethanol and further isolate the desired compounds.
Pros: The process is efficient, fairly inexpensive, and does not require as specialized equipment as other methods. Solvents are superior at locking onto and drawing out the desirable compounds. Hydrocarbons, in particular, are known for preserving the plant’s flavor and aroma well.
Olive Oil Extraction:
“Natural solvents”, like olive oil, are used as well for the extraction of CBD – not commercially, but rather by CBD/cannabis aficionados. The raw hemp is heated to a specific temperature (decarboxylated) and then added to the oil and heated again to extract the cannabinoids. The olive oil does not evaporate like ethanol or hydrocarbon solvents, so the final product will not be as concentrated and is more of a CBD-infused oil instead of a concentrated extract.
Pros: Inexpensive and easy to do in your own home and eliminates concerns over residual solvents, expensive equipment, and safety.
This popular, tried and true method for extracting essential oils can be used to extract cannabinoids as well. Steam is used to free the volatile compounds (cannabinoids in this instance) from the raw plant material. The resulting vapor, full of the desirable compounds, is then cooled and condensed. The resulting oil and water are then separated.
Pros: Inexpensive, straightforward, and a solvent-free method.
In this method, CO2 (which stands for carbon dioxide) is used to pull cannabinoids and other desirable compounds from the harvested hemp plants. This scientifically advanced, yet fascinating process generally involves three chambers. In the first chamber, CO2 – which is in a gaseous state under normal circumstances – is converted to a liquid state by increasing the pressure and significantly decreasing the temperature. Next, the temperature and pressure are slowly increased until the liquid CO2 reaches a “supercritical” point. This is the neat part. At this point, the CO2 is somewhere between a liquid state and a gaseous state and retains some of the properties of each; it expands like a gas, but is more concentrated like a liquid. Once in this optimal state, the CO2 is pumped into the second chamber, which holds the hemp plant material. The CO2 then passes through the hemp, separating the oil (rich in cannabinoids and other beneficial compounds) from the plant material. The oil and CO2 then make their way to the third and final chamber where the two separate and the residual CO2 simply evaporates. What’s left is a highly concentrated CBD oil extract.
Pros: An extremely precise, solvent free method that is safe (no flammable solvents) and environmentally-friendly (uses less energy and plant material).
Everyone has their own preferences when it comes to the products they use and the methods used to create them. But, we can probably all agree on one thing: a minimally processed and expertly crafted product, sourced from simple, quality ingredients is the best choice when it comes to products in the health and wellness category – CBD included. At Pharmstrong™, we create all of our scientifically-formulated Pure + Potent products with that commitment to quality and purity in mind, and we can promise that our safe, proprietary, and precisely executed extraction and purification process isolates all of the desirable compounds our customers want, and excludes those that they don’t. We would be honored to chat with you more in person in our Breckenridge, CO store, over the phone, or via email at any time to answer any remaining questions you may have about the extraction method we use, CBD in general, or one of our premium grade products.
Which CBD oil extraction method is the best?
When prioritising the best CBD products, it’s important that each step of the process is carried out with care and precision. You can grow high-quality hemp, with a large percentage of cannabidiol (CBD), but all of that goes to waste without the proper extraction techniques. So, that raises the question: which method is best?
At Vitality CBD we often discuss the importance of choosing a quality CBD oils, and how premium extraction techniques contribute to a better product. To truly understand why high-end extraction methods matter, let’s first explore how CBD is synthesised.
What is CBD?
CBD, or cannabidiol, is one of over a hundred different cannabinoids found in plants from the Cannabis family. The most famous of these cannabinoids, tetrahydrocannabinol, or THC, is the one that induces the “stoned” effects typically associated with recreational Cannabis use. On the other hand, studies have repeatedly shown that CBD does not get you high.
Currently we know that when introduced to your body, CBD interacts with your pre-existing endocannabinoid system. Understanding that the human body already generates cannabinoids that bear a great similarity to CBD in structure and function is step one in understanding why CBD oil is proving so popular.
Cannabidiol is actually synthesised in the trichomes of the female hemp plant, alongside the other cannabinoids, terpenes, and flavonoids. The need to create CBD oils that retain CBD and other cannabinoids whilst removing the THC is part of why extraction techniques are so important.
How do you extract CBD?
When we extract the best CBD, the end goal is to harvest it in a concentrated form so that it can then be mixed into CDD e-liquids, CBD oils and CBD topicals. That’s why we use a strain of hemp called Cannabis sativa L., renowned for its high CBD levels.
As we’ve mentioned, CBD is actually a constituent in a vast sea of hemp compounds, so extraction isn’t as easy as it first may seem. However, all of these techniques were first developed for other purposes, like extracting essential oils from flowers.
At Vitality CBD we use two different techniques specifically (typically in conjunction) but we’ll discuss all the options available, and how they affect the end result. As always, if you have any further questions drop us an email on our contact page.
CO2 extractions of cannabidiol
The most expensive and most popular CBD extraction method (particularly amongst manufacturers offering a premium product) involves using CO2. This is because it provides a clean, precise extraction that massively reduces the contamination potential of other methods.
The applications of CO2 extractions stem far beyond just hemp products. CO2 extractions are used to decaffeinate coffee beans, to extract the nicotine from loose-leaf tobacco, and to precisely extract spices and flavours.
CO2 extractions can be split into supercritical and subcritical categories (there’s also ‘mid-critical’, a halfway point between the two), but supercritical is the most common, and the one we use at Vitality CBD for all of our CBD products. We’ll breakdown the differences between each below.
The shared methodology between the two essentially entails running pressurised carbon dioxide across the hemp plant to strip away the desired phytochemicals (literally: plant chemicals). When treated to certain conditions, CO2 actually acts like a solvent, without any of the potential side-effects.
Supercritical CBD extraction
Starting with the liquid form of CO2, a supercritical method involves increasing the temperature and pressure of the CO2 until it becomes ‘supercritical’. This means that the CO2 has properties of both gas and liquid: it is able to fill a container like a gas, whilst also having the density of a liquid.
In this supercritical state, CO2 acts as a solvent when applied to the hemp plant without denaturing any of the compounds. The need to maintain the right pressure and temperature explains why CO2 extractions use expensive equipment, resulting in the best CBD.
Once the supercritical CO2 has been passed through the hemp extract, the resultant solution is passed into a separator to be (you guessed it) separated. The CO2 is stored to be used again, whilst the desired hemp compounds are removed and taken to the next step in the process.
Subcritical CBD extraction
The immediate distinction with a subcritical hemp extraction is the lower temperature and lower pressure. As a result, the process takes longer, but it also further reduces the chances of denaturing the more delicate compounds, like terpenes.
Whilst the yield is smaller than with supercritical, it also allows for lighter oils and other sensitive compounds that might otherwise be dismantled in the process to be extracted. However, the trade off is that heavier, more resinous material will typically get left behind.
Solvent CBD extractions
Probably the cheapest and easiest of all the methods available (you could easily do it at home without buying any specialist equipment. not that we recommend this), solvent extractions are also generally considered to be the most likely to cause issues with the end product.
A solvent extraction involves running the solvent in question—typically either butane or ethanol—to the hemp plant matter. This strips the cannabinoids into the liquid, which is then evaporated so as to leave behind a concentrated oily residue with the hemp compounds in.
The main problem is that the solvent not only removes the cannabinoids, terpenes and flavonoids, but also inadvertently extracts chlorophyll. This occasionally leads to unwanted side effects, and will cause the taste to become much more bitter.
Likewise, the compounds that the solvent does remove can either be denatured, or just degraded entirely during the extraction process. As such, whilst it’s the cheapest and easiest method to do on a mass scale, there’s a reason why many companies are phasing it out. When you buy CBD with us, you can be confident it’s not been treated this way.
Olive oil CBD extraction
An olive oil extraction is most commonly done by home brew enthusiasts looking to create their own CBD oils. Though near any oil can be used in this process, olive oil is preferred due to its masking flavour and versatility.
The first step is to either grind the hemp very finely, or to decarboxylate it, a complex word which here means: heat it at a certain temperature. Through this process, several of the cannabinoids have their chemical make-up converted, making some more potent and others easier to extract.
After the initial heating, you then heat the hemp matter further in the olive oil, a process by which the compounds are extracted to the oil. Whilst this is perfect for home users, it results in a low yield and a highly perishable product that isn’t practical on a mass scale.
Dry ice CBD extraction
Whilst the name alone suggests high-tech scientific experimentation, this is another method that can be performed at home (assuming you have access to dry ice). It also benefits from the lack of denaturing solvents, resulting in a cleaner and purer end product.
The process involves flash-freezing the loosely chopped hemp extract, and then sieving the frozen trichomes through a mesh bag. These in turn can then be used as the basis for your cannabidiol oil—it’s really that simple.
Since this is a relatively haphazard and difficult to measure method, the quality is not always ensured depending on how well the hemp is frozen and how vigorously it is sieved. However, if you can get safe access to dry-ice this is a clean alternative to solvents for creating your own CBD oil.
Which CBD extraction method is best?
At Vitality CBD, we would recommend either of the two mentioned CO2 extraction techniques, depending on what compounds you want to prioritise extracting. All of the others have their uses, of course, but CO2 is the best all-rounder.
Learn more about CBD
As mentioned earlier, grasping why a clean and accurate extraction is important is premised on understanding just what is being extracted. Read on here for our supporting articles on terpenes and flavonoids.
If you’ve got any further questions about CBD extraction techniques, or some information you’d like to share with us, our experienced team are always on hand to field any questions. You can reach our friendly team via our contact page, or alternative you can go check out our full CBD range here!
How to make cannabis olive oil rich in CBD
Olive oil, just like almond oil, is an excellent solvent that allows extracting and preserving the resin present in the trichomes, which is loaded with cannabinoids. Another potential benefit of this method is that it leaves no chemical residues in the final product, unlike other extraction methods.
To develop cannabis oil rich in quality CBD there are a number of factors you should consider:
- Quality of the raw material: the cannabis from which you are going to make the oil has to be of high quality and free of chemicals or toxic products that could harm your health. To do this we recommend that cannabis flowers come from organic cultivation, free of pesticides or chemical fertilisers.
- Oil and storage: We recommend using first-pressing organic virgin olive oil and keeping the final product in small glass containers.
- CBD rich varieties: to benefit from the therapeutic properties of CBD you should choose strains containing this cannabinoid. We recommend you:
with a ratio 1:2, THC: CBD 5% to 10% with a ratio 1:1, 10% THC and CBD 10%
What properties does the CBD have?
The therapeutic benefits of CBD or cannabidiol have been extensively tested by various scientific studies indicating that this substance, present in the composition of Sativa Cannabis, has the following medicinal properties.
- Anticonvulsant properties
- It is effective against muscle spasticity
- Anxiolytic and antipsychotic
- Analgesic and anti-inflammatory
Some studies also indicate that cannabis can contribute to the treatment of psoriasis, as its D9-THCA, CBN and CBD inhibit keratinocyte proliferation, one of the consequences of this disease.
How to make cannabis olive oil rich in CBD?
Since the life of oil is limited, we recommend using small amounts and most important, keeping it in a tightly closed glass container and in a cool place.
To prepare the oil you will need.
- 5 Grams of Purple Orange CBD marijuana buds
- 50 Ml of organic olive oil
- 1 Glass container with lid
- a container vessel
- 1 colander
- 1 pot
Follow these simple steps.
- Half fill a saucepan with water and heat slowly over a low heat.
- Pour the olive oil into the saucepan and add the marijuana buds. Since water cannot exceed a temperature of 100 degrees Celsius, with this method you will ensure that the temperature of the cannabis does not exceed 150 degrees, which is the temperature at which some cannabinoids begin to evaporate.
- With the help of a wooden spatula, stir the cannabis flowers and mix with the oil.
- Leave the saucepan over a very low heat for an hour, stirring the contents occasionally.
- After 60 minutes, remove the saucepan from the heat and allow to cool.
- When the contents have cooled, place the saucepan in the refrigerator and leave to cool until the oil solidifies. In this way you will be able to easily separate this from the water, which will remain in liquid form.
- Once you have separated the oil, leave it outside the refrigerator at room temperature so that it returns to its liquid state.
- Finally, sieve the resulting oil through a fine sieve to remove the woody material.
Kushka Barcelona-born journalist and grower with a curious spirit. I used to spend my life travelling, writing and working with cannabis clubs until Professor OG called me. My two passions, the plant and the writing, have followed the same path ever since. I absolutely love tricky subjects, those that oblige me to spend days buried in books, investigating and driving the entire technical team crazy. There’s no way I can write a story without going into the issue in depth. I enjoy challenges, but even more sharing them with you on our blog. You can find on instagram at @_kushka.
- Cannabis activism
- Hot news
- Cannabis Genetics
- Cannabis Growing
- Growing techniques
- Trimming techniques
- Biological prevention
- Organic Growing
- Indoor Growing
- Outdoor Growing
- Grow Reports
- Nutrients and fertilizers
- Medical Cannabis
- Weed Recipes
- Risk reduction
Most popular posts
Can marijuana lead to addiction?
Differences between cannabis and hemp
Cannabis types and varieties
Don’t miss any posts!
Subscribe to our newsletter and stay up-to-date with the latests cannabis news.
Follow us on Social Media
- Weed Recipes
5 ways to recycle cannabis trim after harvest
- Medical Cannabis
How and why cannabis could rejuvenate the brain
- Cannabis Genetics
New 2017 strains: discover our new high-CBD cannabis seeds
- Weed Recipes
Accompany Your Christmas Evenings with This Winter Cannabis Punch
Comments from our readers
Hey! I followed the steps exactly, but now my olive oil won’t solidify in the fridge nor when I put in freezer temporarily. It’s the strangest thing. Usually when the oil solidifies in videos I’ve seen of this process it looks like a layer of fat, solid and whitish. But mine doesn’t solidify in fridge and when I freeze it for a bit to get the temp lower while pulling it out before the water freezes the oil has a icy/crystalline texture. Very confusing. Any advice?
I want to make your CBD olive oil recipe using purple orange that I grew organically outdoors this year. My question is how much CBD/thc will be in the oil? Just wondering how much to take.
Read comments in other languages:
Did you like this post?
Your opinion about our seeds is very important to us and can help other users a lot (your email address won’t be made public).
Any doubts? Contact us!
Customer Service: Monday to Friday from 09:00 am to 04:00 pm (Central European Time)
- Having problems with the purchase process?
- Any doubts about the shipping methods?
- Any questions regarding your order?
- Having problems with your seeds?
- Need technical assistance?
- Want more information about Dinafem Seeds?
- Anything you’d like to share with us?
- Do not hesitate to send us any comments or suggestions you may have.
We are unable to process any orders until further notice
We are very sorry to inform you that, against our will, we are now unable to engage in any commercial activity. We are working round the clock to resume normal activity as soon as possible, but we still don’t know when we’ll be able to operate normally.
We’ll keep you informed of any developments.
Thank you very much for your trust.
- Payment methods:
- Secured by:
- Delivery companies:
Terms and Conditions
News and discounts
In seed orders that total more than €80‚ paid by credit card, will qualify for FREE SHIPPING
- © 2022 Dinafem Seeds | Pot Sistemak, S.L. – Aldamar Kalea 32, 20003 Donostia, Gipuzkoa – Tax no. B20743530
We refuse to sell cannabis seeds to anyone who we believe is going to use them to grow cannabis in countries where it is illegal. Follow us on social media to get details on when it becomes legal in different countries
Before contacting us, please confirm you’ve read and accept the following data protection information
Information on the protection of our CONTACTS’ personal data